#857616

Dbl Pipe Clamp 9/16 HDG Stl/Vinyl .343 Hole CMV-1011Z1
Diameter Thread Threads Length Grade Finish Weight
Partial 0 .0508
Diameter
Thread 0
Length
Grade
Finish
Weight .0508



P Style Clamps

The P style Medium Duty Clamp is most popular clamp for holding wiring and tubes. Furnished open to allow the clip to be snapped over wiring or tube, and then closed with the bolt at assembly. The clamp supports electrical wires, conduit and hydraulic lines. Contoured to minimize distortion.

P Style Medium Duty Clamp – Uncoated (CO Series)

P Style Medium Duty Clamp – Vinyl Coated (COV Series)

P Style Medium Duty Clamp – Rubber Liner (COL Series)

  • Round top hole, slotted lower hole for easy alignment
  • Holds electrical wires, conduit lines or hydraulic lines
  • HD galvanized steel, G90 treated
  • Sizes range from .125” to 4” clamping diameter
  • HDG Coating meets ASTM A653/ A653M standards
  • Vinyl Coating is protective and sound dampening
  • Rubber cushion: added protection and noise dampening capabilities
  • The P style Heavy Duty Vinyl Coated Clamp Up to .060 gage clamps for use where maximum clamp strength is required. The clamp supports electrical wires, conduit and hydraulic lines. Furnished closed to maintain strength and allow the tube or wiring to be slide though for assembly. Contoured to minimize distortion during clamping.

    P Style Heavy Duty Clamp – Uncoated (CC Series)

    P Style Heavy Duty Vinyl Coated Clamp (CCV Series)

  • Round top hole, round lower hole
  • Made from heavier gage steel than medium duty clamps
  • HD galvanized steel, G90 treated
  • Holds electrical wires, conduit lines or hydraulic lines
  • Sizes range from .250” to 2” clamping diameter
  • HDG coating meets ASTM A653/A653M standards
  • The P style Light Duty Clamp is also known as the Vinyl Coated Loop Clamp, Cushioned Clamp, or Metal Hose Clamp. The CF series clamps have flared edges around clamping loop help prevent wire or tube abrasion. Furnished open to allow the clip to be snapped over wiring to tube, then closed with the bolt at assembly. The clamp supports electrical wires, conduit and hydraulic lines. Contoured to minimize distortion during clamping.

    P Style Light Duty Clamp– Uncoated (CF and CW Series)

    P Style Light Duty Vinyl Coated Clamp (CFV and CWF Series)

  • CF clamps have flared edges around clamping loop prevent wire or tube abrasions
  • CW clamps have straight edges around the clamping loop
  • Round top hole, slotted lower hole for easy alignment
  • Holds electrical wires, conduit lines or hydraulic lines
  • HD galvanized steel, G90 treated
  • Sizes range from .125” to 4” clamping diameter
  • HFG coating meets ASTM A653/ A653M standards
  • Double P Style Clamps KMC CD and CDV Series)

    Standard products designed for clamping two tubes of equal diameters. Furnished open to allow the clip to be snapped over tube, then closed with the bolt at assembly. The clamp supports electrical wires, conduit and hydraulic lines. Contoured to minimize distortion.

    Double P Style Clamps – Uncoated (CD Series)

    Double P Style Clamps – Vinyl Coated (CDL Series)

    Double Tube Rubber Liner (CDL Series)

  • Round top hole, slotted lower hole for easy alignment
  • Vinyl coating dampens sounds and protects tubing
  • Rubber cushion: added protection and noise dampening capabilities
  • Holds electrical lines, pneumatic line, conduit lines or hydraulic lines
  • HD galvanized steel, G90 treated
  • Sizes range from .167” to 1” clamping diameter
  • HDG coating meets ASTM A653/ A653M standards
  • Double Pipe Clamps

    Used to hold two wires or tubes against a solid surface. A slotted middle mount separates the two tubes when fastened.

    Double Pipe Clamps – Uncoated (CJ Series)

    Double Pipe Clamps Vinyl Coated (CJV Series)

  • Center mount style
  • HD galvanized steel, G90 treated
  • Sizes range from .187” to 1.5” clamping diameter
  • Meets ASTM A653/A653M
  • HAVE A QUESTION?

    • Support 1-800-327-6378